datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications catv supertrunking high power distri bution networks redundant ring architectures fttx networks features high saturation output power up to 36 dbm dual power supplies, redundant & hot swappable ? ac or dc front panel optical input & output monitor ports snmpv2 control interface low noise figure for catv wide input dynamic range very stable output power over a wide operating temperature range nmoa8200 series edfa and eydfa this product line is a family of state-of -the-art high performance catv erbium doped fiber amplifiers (edfa) or erbium/ytt erbium doped fiber amplifiers (eydfa). packaged in convenient 2ru housing, this line of fiber amplifiers uses the latest dsp technology at the core of electrical control circuitry resulting in superior output power stability & exceptionally low noise figures demanded by catv applications. the nmoa8200 provides very stable optical outputs over a wide operating temperature range. internally it is supported with input and output isolators for enhanced system stability and performance. optical power is continuously monitored at the input and output for automatic power control during operation over a wide operating temperature range. the nmoa8200 offers a rich set of features. these include remote management capability through snmpv2 and telnet. the nmoa8200 also supports mibs specified by scte (society of cable television engi neers) for this product class. additionally, the front panel?s lcd and button provides the operator with the option to both monitor the status of the amplifier and control/operate the amplifier locally. optional features automatic power control and/or automatic gain control modes port count, optical power, and connector style options integrated per channel wdm for fttx pon applications monitors & alarms loss of input signal loss of output power pump laser diode bias current pump ld temperature case temperature redundant power supplies redundant fans nmoa8200 series catv fiber amplifie r
datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. electrical characteristics property symbol min typ max unit ac power supply voltage v ac 85 265 v ac dc power supply voltage v dc -36 -48 -72 v dc power consumption p tot 80 w note 1: 80 w valid at 0 dbm input and 36 dbm output powers within specified operating temperature range. general and mechanical specifications property symbol min typ max unit wavelength range ? op 1545 1550 1562 nm input power p in -10 0 12 dbm total output power options note 1 p out 30 36 dbm output power delta to nominal note 2 p out ? -0.5 0.5 db output port count options (sc) notes 1, 3 - 1 64 noise figure note 4 nf 6.0 db optical isolation iso 30 db input power alarm los -12 -11 -10 dbm input monitor loss i mon 22.5 23.5 24.5 db output monitor loss o mon 19 20 21 db note 1: total output power and number of ports varies by model type. note 2: valid for 1-20 ports. 32 ports and 64 ports have larger deltas. note 3: model types are specified by output power per port note 4: test condition with input power = 0 dbm (@ 1550nm) note 5: specifications are valid within operating temperature range. absolute maximum ratings property symbol min typ max unit operating temperature range to 0 50 o c storage temperature range ts -40 85 o c relative humidity h 0 95 % nmoa8200 series catv fiber amplifie r
datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. outline drawing european union ?rohs directive? compliance except for the exemption claimed herein for lead used in sol der for network infrastructure equipment, all homogenous materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium, hexavalent chromium, polybrominat ed biphenyls and polybrominated biphenyl ethers permitted under t he european union directive 2002/95/ec (the "rohs directive"). nmoa8200 series catv fiber amplifie r
datasheet | october 2013 fiber optics | rev 2013.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. model number information (note 1) nmoa8200 ? ? 0 integrated wdm output power per port number of output ports optics output location power supply blank ? none wdm ? 1310/1490/1550 wdm present xx ? xxdbm/port (maximum: xx = 21 dbm for 1 port) 01 ? 1 port 02 ? 2 ports 04 ? 4 ports 08 ? 8 ports 16 ? 16 ports 20 ? 20 ports 32 ? 32 ports 64 ? 64 ports 1 ? sc/apc 2 ? fc/apc 4 ? sc/upc 5 ? fc/upc 0 ? front 1 ? rear 1 ? ac primary, no secondary 2 ? dc primary, no secondary 3 ? ac primary, ac secondary 4 ? ac primary, dc secondary 5 ? dc primary, dc secondary note 1: not all configurations are available; please contact your emcore sales representative. e.g. nmoa8200-2116-1003 (eydfa, 21 dbm/port, 16 ports, sc/apc, front fiber, dual dc) e.g. nmoa8200wdm-2016-1005 (eydfa with integrated wdm, 20 dbm/port, 16 ports, sc/apc, front fiber, dual dc) laser safety information fda/cdrh class 1m and iec ? 60825 class 1m laser product. all versions are class 1m laser products per iec 60825-1:2007 en 60825-1:2007 maximum output: 30 mw, wavelength: 1550 nm caution: use of controls, adjustment and procedures other than those specified herein may result in hazardous laser radiation exposure. nmoa8200 series catv fiber amplifie r
|
